IBM SelectaDock II, User Manual

Page: 133 / 168

Installing EZ-SCSI for Windows
The Windows version of EZ-SCSI gives you access to the Adaptec
SCSI device drivers and ASPI (advanced SCSI programming
interface) managers that make your SCSI devices work efficiently. It
also includes a number of applications that are described later in this
appendix. Dock your computer to the docking station; then follow
these steps to install Adaptec EZ-SCSI for Windows:
1
Start Windows.
2
Insert the SelectaDock option diskette into the diskette drive.
3
Insert docking station option diskette in a floppy diskette drive on
your computer.
4
Select File and Run from the Program Manager menu bar.
When the Run dialog box appears, enter
a:\setup
if you are
using the A drive, or
b:\setup
if you are using the B drive.
5
Click on OK. A message appears while Adaptec EZ-SCSI loads
into memory.
6
Click on Install Adaptec EZ-SCSI to continue with the
installation.
Click on Help on any screen to view more information. To close
a Help window, select File and Exit, or double-click on the
control-menu box in the upper left corner of the window.
7
Follow the instructions that appear on the screen. Click on
Continue, Install, or OK to continue with the installation and
accept the EZ-SCSI default values.
If you accept all the default values, EZ-SCSI:
Decompresses and copies the files to the C:\SCSI directory.
(It creates this directory if it does not already exist.)
Adds command lines to your computer's configuration files
(AUTOEXEC.BAT or CONFIG.SYS or both) that load the
required device drivers into memory when you start your
computer.
Appendix B. Using the SCSI Support Software
121