![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587071.webp)
Installing or Removing a PC Card
Two PCMCIA slots on the docking station can accommodate either of
the following PC Card combinations:
Two Type I or Type II Cards
One Type III Card (lower slot only)
To install a PC Card, or to remove it, do the following:
1
Slide the PC Card lock to the unlocked position.
2
Determine which slot to use. The Type III card must be inserted
into the lower slot only.
3
Align the card in the slot, and insert until it is fully seated
1
.
4
Slide the PC Card lock to the locked position
2
. If the security
knob does not slide, leave it as it is.
This completes the installation of a PC Card.
To remove the card, press the corresponding eject button
3
.
Note: If you have difficulty pressing with your finger, use a pointed
device.
Chapter 3. Installing and Removing Options
59
Summary of Contents for SelectaDock II
