IBM SelectaDock II, User Manual

Page: 42 / 168

1
Make sure that the Docking Control program has been
activated to enable hot docking. The Docking Control program
can be installed from the utility diskette shipped with your
docking station, if you need to reinstall the program. Also, you
need to update the ThinkPad Utility Program to enable hot or
warm docking.
There are two options in Docking Control:
Hot/Warm docking/undocking (default: disable) and
Beep when docking/undocking (default: enable).
For Windows 3.1, do the following:
To enable the Hot/Warm docking/undocking option:
a) Select the Docking Control icon.
b) Select Enable hot/warm dock/undock in the menu that
appears.
To disable the Beep when docking/undocking option:
a) Select the Docking Control icon.
b) Select Disable beep when docking/undocking in the
menu that appears.
For DOS, do the following:
To enable hot or warm docking, type at the DOS command
prompt:
DOCK2 /ED
To disable beeping when docking, type at the DOS
command prompt:
DOCK2 /DB
2
Make sure that the SelectaDock base is attached to the docking
station and the security key is set to unlock.
3
Make sure that the power cord is connected to the docking
station.
4
Make sure that the AC Adapter cord is disconnected from your
computer.
5
Dock the computer to the SelectaDock system.
30
IBM ThinkPad SelectaDock II User's Guide