IBM SelectaDock II, User Manual

Page: 39 / 168

7
Check that the Docked indicator
3
is lit.
8
Turn the security key to the locked position
2
if you want to
secure the devices. You can then remove the key.
9
Turn on your computer, using its power switch
1
. The
SelectaDock system powers on automatically; then the computer
starts to boot. Check that the Power On indicator on the
status indicator of the docking station is lit.
Note: To set up optional devices, see Chapter 3.
This completes the procedure for cold docking.
Cold Undocking
This procedure describes how to undock your computer from the
SelectaDock system when the computer power is turned off by the
power switch (cold undocking).
1
Turn off your computer.
2
Turn the security key to the eject position to eject the computer.
3
Grasp the computer and lift it out.
This completes the procedure for cold undocking.
Chapter 2. Using the SelectaDock System
27