![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587135.webp)
3
Type
dosinst
and press Enter. A message appears while
Adaptec EZ-SCSI loads into memory.
4
When the first EZ-SCSI screen appears, read the text carefully.
You can press F1 for additional Help text on any screen. (Press
Esc to exit a Help screen.)
5
Press Enter to continue with the installation.
6
Follow the instructions that appear on the screen. Press Enter
at each screen to accept the EZ-SCSI default values. (Press
Esc to continue after EZ-SCSI enters changes to your system
configuration files.)
If you accept all the default values, EZ-SCSI:
Decompresses and copies the files from the diskettes to the
C:\SCSI directory. (It creates this directory if it does not
already exist.)
Adds command lines to your computer's configuration files
(AUTOEXEC.BAT or CONFIG.SYS or both) to load the
required device drivers into memory when you start your
computer.
If you want to copy the files to a different directory or control the
changes to your configuration files, follow the instructions on the
screen. Press F1 on any screen to see more information.
7
When you see the final screen and the message
Adaptec
EZ-SCSI has been successfully installed...
, press Enter or
Esc to exit EZ-SCSI. Then restart your computer.
Reinstalling Adaptec EZ-SCSI
You should reinstall Adaptec EZ-SCSI if you change your SCSI
hardware configuration. This allows EZ-SCSI to adjust your
configuration files so the appropriate device drivers and other files are
loaded into memory.
For example, if you reinstall EZ-SCSI after connecting a CD-ROM
drive to your SCSI port, the CD-ROM device driver is added to your
Appendix B. Using the SCSI Support Software
123
Summary of Contents for SelectaDock II
