IBM SelectaDock II, User Manual

Page: 13 / 168

Chapter 1. Introduction
This chapter contains:
Standard Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Unpacking the Box
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Locating the Features
. . . . . . . . . . . . . . . . . . . . . . . . . .
6
Front View
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Side View
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Rear View (Rear and Connector Covers Removed)
. . . . . . .
9
Inner View
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
SelectaDock II Status Indicators
. . . . . . . . . . . . . . . . . . .
11
The IBM ThinkPad SelectaDock II docking station works with the IBM
ThinkPad SelectaDock Base Model I to provide a complete docking
system for IBM ThinkPad 760E series computers.
Important
1. The SelectaDock II docking station supports only PCI bus
computers. It does not support ISA bus computers, even
though the SelectaDock Base Model I supports both PCI and
ISA bus computers. If you try to dock an unsupported
computer to the SelectaDock system, you will be alerted by the
Attention indicator and a series of beeps. If you try to hot- or
warm-dock an unsupported computer to the SelectaDock
system, the system will shut down automatically.
2. Make sure that you are using the latest system ROM version
in the ThinkPad system. See “Setting Up Your ThinkPad
System” on page 14.
Copyright IBM Corp. 1996
1