IBM SelectaDock II, User Manual

Page: 74 / 168

3
Connect the other end of the cable to a MIDI equipment
connector or a joystick.
4
If you are going to use a joystick, go to the next step.
Otherwise, go to step 9.
5
If you have a Sound Blaster–compatible ISA adapter card
installed, do not try to use it.
Note: If you try to use the card at the same time as the port,
the computer will have resource conflict problems.
When you use the card, set the on/off jumper to the OFF
position (see step 7).
6
Undock the computer and SelectaDock base using cold
undocking. See “Cold Docking and Undocking” on page 26.
7
Locate the game switch
2
, and transfer the right switch from
the OFF position to the ON position.
Note: The game switch enables the functions of the joystick.
By turning this switch on, you can use the functions of the
joystick in the MIDI/joystick port of the docking station.
8
Attach the SelectaDock base and redock the computer. See
“Cold Docking and Undocking” on page 26.
9
Turn on your computer.
This completes the connection of the MIDI/joystick port.
62
IBM ThinkPad SelectaDock II User's Guide