IBM SelectaDock II, User Manual

Page: 54 / 168

e) Set the drive removal handle in place.
f) Attach the SelectaDock base, and then dock your computer.
g) Go to step 4.
4
Check that the Attention indicator is not lit and no beeps are
heard.
Note: If the Attention indicator comes on, verify that the drive
you just installed is compatible with the UltraBay or that
no more than two IDE drives are installed. If you are
sure the drive is compatible, remove and reinstall the
drive to ensure proper connection.
5
Turn on the computer with the computer power switch.
6
If you installed a CD-ROM drive, install the device driver for the
CD-ROM drive by referring to the user's guide of your computer.
7
If you installed an IDE drive, see “IDE Setup” on page 64.
This completes the installation in the UltraBay.
42
IBM ThinkPad SelectaDock II User's Guide