IBM SelectaDock II, User Manual

Page: 105 / 168

If an error is detected, an error code is displayed near the device icon
on the screen. You can find the error description of the error codes in
the user's guide for your computer.
To isolate the error to the drive itself or the docking station, remove
and reinstall the drive directly in the computer, and run the same test
on the drive. If the error recurs, the drive has an error and needs to
be serviced. If the error does not recur, the docking station has an
error. In this case, have the docking station serviced.
SCSI Subsystem Test
The SelectaDock Docking System Options Diskette helps you
troubleshoot expansion unit, SCSI adapter, and SCSI device problems
through a series of menus.
Run the diagnostics after you have completed the installation of your
SelectaDock system and SCSI devices to verify that these devices
work correctly.
Do the following:
1. Turn off the computer, the SelectaDock system, and external
SCSI devices.
2. Insert the Option Diskette into drive A.
3. Turn on all attached external SCSI devices, the computer, and the
SelectaDock system. The logo screen appears. After a few
seconds the main menu appears.
4. Select Test SCSI Subsystem.
5. Follow the instructions on the panel.
Chapter 7. Solving Problems
93