![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587146.webp)
5
When you have entered the number of cylinders you want, press
Esc. The panel shown in the following figure appears:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
Adaptec SCSI Disk Setup Program v3.32
Logical Drive Info
64
32
85
512
85
head
sectors/track
cylinders
bytes/sector
megabytes
Type
Start End Megs
Create a DOS Partition
Start Cylinder:
End Cylinder:
0
84
Create Partition? - <F1> Help
Yes
No
6
To create the partition, select Yes; then press Enter.
If you want to create more partitions, press Ins and repeat steps
3, 4, and 5.
There are limits to the size of the partition, depending on which
version of DOS you are using. The following table explains the
limits:
DOS Version
Maximum Partition Size
IBM 6.3 and later
1 GB/partition to a maximum of 1 GB/drive. (Up to 2
GB/partition to a maximum of 8 GB/drive, if extended BIOS
translation is used.)
134
IBM ThinkPad SelectaDock II User's Guide
Summary of Contents for SelectaDock II
