![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587065.webp)
b) To attach a SCSI device, do the following:
Make sure the SCSI terminator is removed or disabled on
the SCSI device. To remove the SCSI terminator, see the
SCSI device manual.
Enable the auto start of your SCSI device.
Insert the SCSI device into the half-height drive space.
Leave enough space in the back of the drive so the cables
can be connected.
Insert the connector
1
of the SCSI cable in the docking
station to the corresponding connector of the SCSI device.
While pressing the connected cables so that they are not
above the half-height drive space, screw in the half-height
drive tray containing the SCSI device.
Install the top cover.
This completes the installation in the half-height drive space.
Removing a Drive
To remove a drive from the half-height drive space, do the installation
procedure in reverse order.
Chapter 3. Installing and Removing Options
53
Summary of Contents for SelectaDock II
