![background image](http://html1.mh-extra.com/html/ibm/selectadock-ii/selectadock-ii_user-manual_3330587126.webp)
configuration function. By using this function, you can specify device
drivers to be configured for both docked and undocked configurations.
After setting up the configurations, when you boot the operating
system, a menu appears to let you select the configuration for the
system you are booting. By doing this, only necessary device drivers
are loaded, eliminating redundant space from your memory and time
to load. Refer to the operating system documentation for details.
If Multiple Configurations Are Not Supported
If the operating system you are using does not support the selection of
device drivers to be loaded by means of a multiple configuration, all
the necessary device drivers for the docked configuration must be
configured. This configuration works for docked state. When you
boot the operating system for stand-alone state, you see error
messages that devices are not available. If a prompt accompanying
an error message requests a reply, you can ignore the message by
just pressing Enter.
Operating System Hints
For OS/2 Warp
To install OS/2 Warp from a SCSI CD-ROM drive that is connected to
the SelectaDock SCSI connector, do the following:
1
Make a copy of Diskette 1 of the operating system:
a) Insert Diskette 1 and a blank diskette in drives A and B.
b) Type the following command at the command prompt
screen:
diskcopy a: b:
c) Press Enter.
2
Copy AIC7870.ADD from the SelectaDock Option Diskette to the
root directory of the copied Diskette 1. The root directory is the
first directory on the diskette. AIC7870.ADD overwrites any
existing versions of the device drivers included on the copied
Diskette 1.
114
IBM ThinkPad SelectaDock II User's Guide
Summary of Contents for SelectaDock II
