IBM SelectaDock II, User Manual

Page: 41 / 168

Hot or Warm Docking for Windows 95
Docking
In the boot process after cold docking, the operating system tries to
set a configuration including the devices installed in the SelectaDock
system. After the configuration has been set up, you can dock your
computer in hot or warm mode. The SelectaDock system devices
immediately become available to your computer.
Undocking
To use hot or warm undocking for Windows 95, do the following:
1
There are two ways to eject your computer from the docking
station:
Select Eject in the Start Menu.
Turn the security key to the eject position and release the
key.
An eject request is made to the operating system.
If the operating system judges the request can be honored,
the computer ejects.
Considerable time may be required to complete the eject
process. To see if the eject process has completed, click on
the start icon. If “eject” appears, undocking is still in
progress. If not, the eject process has completed.
If the operating system rejects the request, messages
appear on the screen explaining the reason. In this case,
use cold undocking.
2
When you hear the beep sound, turn the security key to the eject
position again to eject the computer from the SelectaDock
system.
Hot or Warm Docking for DOS or Windows 3.1
Docking
To use hot or warm docking for DOS or Windows 3.1, do the
following:
Chapter 2. Using the SelectaDock System
29