Below is a step by step guide to assembling the Hurricane-Rig.
Remember that this is a precision optical instrument.
Excessive force can bend critical parts. If treated well it
should give many years of reliable service.
Further Information can be found at www.hurricane-rig.com
ASSEMBLY STEP 1:
Start by attaching your tripod plate to the base of the top camera
platform assembly (which incorporates the interaxial and convergence
adjusters). It is best if your tripod plate is attached towards the front of
the assembly as the rig will tend to be front heavy. The front of this
assembly is the end away from the small convergence adjuster knob.
Once the tripod plate is attached, mount the top camera platform on
your tripod. It is easiest to build the rig when it is mounted on a tripod.
