HP 64783A, User Manual

Page: 571 / 816

Stepping aborted; number steps completed: <steps completed> (Error 686)
Cause: This message is displayed if a break was received during a step command
with a stepcount greater than zero. The break could have been due to any of the
break conditions or a <CTRL> c break. The number of steps completed is displayed.
Stepping failed (Error 680)
Cause: Stepping has failed for some reason. For example, this message will appear
if the emulator can’t modify the trace vector, which is used to implement the step
function. Usually, this error message will occur with other error messages.
Action: Refer to the descriptions of the accompanying error messages to find out
more about why stepping failed.
Stored deMMUer file: <FILE>
Cause: This is a status message. It indicates that a deMMUer configuration file was
successfully stored.
Symbol cannot contain text after the wildcard (Error 879)
Cause: You tried to include text after the wildcard specified in the symbol name
(for example, symbol*text).
Action: Enter the symbol again, but do not include text after the wildcard (*).
Symbol cannot contain wildcard in this context (Error 878)
Cause: You tried to enter a global, local, or user symbol name using the wildcard
(*) incorrectly.
Action: When you enter the symbol name again, include the wildcard (*) at the end
of the symbol.
Chapter 12: Emulator Error Messages
Stepping aborted; number steps completed: <steps completed> (Error 686)
541