HP 64783A, User Manual

Page: 156 / 816

To display local symbols
•
If you are using the Graphical User Interface:
•
First place the name of the symbol whose local symbols should be displayed
into the entry buffer, and then in the menu bar, choose Display
→
Local
Symbols().
•
When displaying symbols, position the mouse pointer over a symbol on the
symbol display screen and click the select mouse button.
•
When displaying symbols, position the mouse pointer over the symbol, press
and hold the select mouse button, and choose Display Local Symbols from the
popup menu.
•
Using the command line, display the symbols defined within a given symbol by
entering the command:
display local_symbols_in <symbol_name>
This command displays address information associated with each symbol. The
symbols defined within a given symbol are local to that symbol. That is, they are
defined as children of that symbol. See “To enter a symbol” for more information
on the <symbol_name>. If no local symbols are associated with your selection, the
interface displays the parent symbol.
To display the address ranges associated with the high-level program’s source file
line numbers, you must display the local symbols in the file.
Example Display the local symbols for the update_sys module in the demo program:
display local_symbols_in update_sys(module)
Suppose that you had an IEEE-695 absolute file with a module named system and a
procedure within that module also named system. You could display the local
symbols for the procedure named system by entering:
display local_symbols_in system.system
Chapter 4: Using the Emulator
Using Symbols
126