HP 64783A, User Manual

Page: 547 / 816

File transfer aborted (Error 410)
Cause: A transfer operation was aborted due to a break received, most likely a
<CTRL> c from the keyboard. If you typed <CTRL> c, you probably did so
because you thought the transfer was about to fail.
Action: Retry the transfer, making sure to use the correct command options. If you
are unsuccessful, make sure the data communications parameters are set correctly
on the host and on the HP 64700; then retry the operation.
Guarded mem break: <guarded memory address> (Async_Stat 628)
Cause: This status message indicates that the target program accessed memory
mapped as guarded and the emulator interrupted target execution and began
running in the monitor. When the MMU is enabled, the address displayed in this
message will be physical, as denoted by the trailing "a" after the function code.
Handled target exception: <exception> (Error 628)
Cause: The vector base register points to the exception vector table in the
foreground monitor and the target program generated an exception that was caught
by the monitor.
Hardware breakpoints can only be used in target memory (Error 154)
Cause: You attempted to use the "force hardware" option to set a breakpoint at an
address mapped as emulation memory. The "force hardware" option for
breakpoints is not available for addresses in emulation memory; it is only available
for breakpoints in target memory, typically for setting breakpoints in target ROM.
Action: Delete the "force hardware" option from your command and try to set the
breakpoint again.
HP64783 M68040 firmware not compatible with emulation probe (Status 179)
Cause: The emulation control card is programmed with MC68040 firmware, but the
firmware does not identify the probe as being the MC68040.
Action: Make sure that you are using an MC68040 probe, and then make sure the
probe cables between the control card and the probe are connected correctly. Refer
to Chapter 19, "Installation and Service", for proper cable connections.
Chapter 12: Emulator Error Messages
File transfer aborted (Error 410)
517