HP 64783A, User Manual

Page: 573 / 816

Target memory access failed (Error 700)
Cause: The emulator was unable to perform the requested operation on memory
mapped to the target system. This message is displayed in conjunction with other
error messages that further clarify the problem that occurred. In most cases, the
problem results from the emulator’s inability to break to the monitor to perform the
operation.
Action: See other error messages in the error log to further understand the cause of
the error.
Trig1, trig2 delay spec out of bounds: <Entered Numeric Value> (Error 1255)
Cause: The terminal interface tgout (trigger output) command of the deep analyzer
provides a delay feature that allows for driving of the trig1 and/or trig2 signals a
specified number of states after trigger or before trace complete. The delay value
must be in the range 0 through "current analyzer depth - 1". The current analyzer
depth is controlled by the terminal interface command tcf. Note: Use of this delay
feature may cause modification of the current trigger position value.
Action: Correct the delay value in your specification so that it is within the range
of 0 through "current analyzer depth -1".
Trigger position changed to accomodate trig1, trig2 delay spec (Status 1203)
Cause: The terminal interface tgout (trigger output) command provides a delay
feature that allows for driving of the trig1 and/or trig2 signals a specified number of
states after trigger or before trace complete. The setup of this delay feature
interacts with the trigger position specification. The trigger position specification
may be automatically modified by the deep analyzer in order to make the delay
feature work in the expected manner.
Action: You can use the terminal interface command tp (trigger position) to
examine the new trigger position value.
Trigger term cannot be term 1 (Error 1251)
Cause: This error occurs when you attempt to specify the first sequence term as the
trigger term. The trigger term may be any term except the first.
Action: Respecify the trigger term as any other sequence term.
Chapter 12: Emulator Error Messages
Target memory access failed (Error 700)
543