HP 64783A, User Manual

Page: 192 / 816

Examples
To modify a register, choose Modify
→
Register..., and fill in the dialog box.
To use the command line to modify the PC register to an address:
modify register PC to init_system
To use the command line to modify the D3 register to 0:
modify register D3 to 0
Place the mouse pointer in
the text entry area and type
in the name of the register
and the new value.
Click this pushbutton to
read the present value of
the selected register.
Click Recall to select
register names and
values from predefined
or previously specified
entries.
Click this pushbutton
and select the desired
type from the submenu.
Click OK to modify
the register to the new
value and close the
dialog box. Click Apply to modify
the register to the value
specified and leave the
dialog box open. Click this pushbutton to
cancel the modification and
close the dialog box.
Chapter 4: Using the Emulator
Viewing and Modifying Registers
162