HP 64783A, User Manual

Page: 393 / 816

If the deMMUer runs out of resources during the
loading process
Check the physical address ranges that will be reverse translated by the present
setup of the deMMUer. Enter load demmuer verbose to see a list of those
physical address ranges. If all of the physical spaces where you have code under
development are listed, ignore the "out of resources" message.
Check to ensure that you have placed sufficient restrictions in the MMU mapping
paths to prevent reverse translating physical address space where you have no
memory.
Check your emulation memory map to make sure you have entries to support each
of the address spaces where you have code under development. Make sure those
spaces are no larger than they need to be to accommodate your program code.
Check if you are using both root pointers in your memory mapping scheme. The
deMMUer may have run out of resources for only one of the root pointers.
Read "Using the deMMUer" in Chapter 10, "Using Memory Management", for
ways to make more efficient use of deMMUer resources.
Chapter 9: Solving Problems
If the deMMUer runs out of resources during the loading process
363