HP 64783A, User Manual

Page: 251 / 816

To change the column width
•
Choose Settings
→
Display Modes..., and select desired widths for information in
the trace list by using the dialog box. Refer to the "Examples" page under "To
display symbols in the trace list", earlier in this chapter for details of how to use the
dialog box.
•
To set the column width for the address column in the trace list, enter:
set width label <WIDTH>
•
To set the column width for the mnemonic column in the trace list, enter:
set width mnemonic <WIDTH>
•
To set the column width for source lines in the trace list, enter:
set width source <WIDTH>
•
To set the column width for the symbols column in the trace list, enter:
set width symbols <WIDTH>
<WIDTH> is an integer specifying the width of the column in characters.
(<WIDTH> is restricted to certain values which are shown if you press the
<WIDTH> softkey.)
You can display more information by widening a column or ignore the information
by narrowing the column. For example, you might want to widen the label column
so that you can see the complete names of the symbols in that column.
You can combine multiple options on the command line to set the width for several
columns at once.
Chapter 5: Using the Emulation-Bus Analyzer
Displaying the Trace List
221