14-75
13) Install the oil slinger on the vertical shaft aligning the
projection on the inside of the oil slinger with the recess of
the pinion gear installation side of the vertical shaft.
14) Attach the special tool to the new needle bearing as shown.
Install the needle bearing with the stamped side of the
needle bearing (outer race) toward the special tool.
TOOL:
Oil seal driver attachment, 27.5 x 44 mm
07948-9540000
15) Install the needle bearing in the gear case using the special
tools.
TOOLS:
Shaft installer, 15 x 370 mm
07VMF-KZ30200
Attachment, 78 x 90 mm
07GAD-SD40101
Oil seal driver attachment, 27.5 x 44 mm
07948-9540000
16) After installation, check that the bottom surface of the
needle bearing is flush with the bottom of the gear case.
Apply grease to the needle bearing roller.
[4]
OIL SEAL DRIVER
ATTACHMENT,
27.5 x 44 mm
07948-9540000
[1]
SHAFT INSTALLER,
15 x 370 mm
07VMF-KZ30200
[2]
ATTACHMENT,
78 x 90 mm
07GAD-SD40101
[3]
GEAR CASE
[4]
OIL SLINGER
[1]
VERTICAL SHAFT
[2] PROJECTION
[3]
CONCAVE
[5]
NEEDLE
BEARING
[1]
OIL SEAL DRIVER
ATTACHMENT,
27.5 x 44 mm
07948-9540000
[2]
NEEDLE
BEARING
[6]
(Apply grease
to the roller.)