17-6
4) Install the remote control cable plate on the flat surface of the remote control cable grommet by aligning the
projection on the remote control cable plate with the groove in the under cover front bracket. Take care not to move
the alignments described in step 1 and 2 this time. Secure the remote control cable plate with the 6 x 16 mm hex.
bolt.
Secure the starter cable with the cable bracket A.
5) Connect the indicator light 6P connector and the remote control cable 14P connector.
Install the indicator light 6P connector and the remote control cable 14P connector on the neutral switch bracket.
[2] REMOTE CONTROL
CABLE 14P CONNECTOR
[1] INDICATOR LIGHT
6P CONNECTOR
[3]
NEUTRAL SWITCH
BRACKET
[4]
REMOTE CONTROL
CABLE GROMMET
[6]
UNDER COVER FRONT
BRACKET
[10]
6 mm WASHER
[1]
6 x 16 mm HEX. BOLT
[2]
REMOTE CONTROL
CABLE PLATE
[8]
STARTER CABLE
[7]
CABLE
BRACKET A
[5]
GROOVE IN UNDER
COVER FRONT BRACKET
[9]
FLAT SURFACE
[3]
PROJECTION