BF135A•BF150A
5-139
c. INJECTOR BASE REMOVAL/INSTALLATION
1) Remove the fuel injectors (P. 5-136).
2) Remove the silencer case (P. 5-128) and remove the intake manifold (P. 5-129).
3) Remove the five 8 x 25 mm flange bolts and the two 8 mm flange nuts, then remove the injector base and the injector
base gasket.
4) Install the removed parts in the reverse order of removal.
• Replace the injector base gasket on assembly.
• Tighten the 8 x 25 mm flange bolts and the 8 mm flange nuts to the specified torque in the numbered sequence in
a criss-cross pattern in two or three steps.
TORQUE: 24 N
•
m (2.4 kgf
•
m, 18 lbf
•
ft)
[2]
INJECTOR BASE
24 N·m (2.4 kgf·m, 18 lbf·ft)
[3]
8 mm FLANGE NUT (2)
24 N·m (2.4 kgf·m, 18 lbf·ft)
8 x 25 (5)
Do not reuse.
[1] INJECTOR BASE GASKET
