12-12
16) Apply engine oil to the threads and seat of the 6 x 25 mm
flange bolts
17) Install the two dowel pins and crankcase on the lower block
and loosely tighten the 6 x 25 mm flange bolts.
18) Tighten the 6 x 25 mm flange bolts to the specified torque
in the numbered sequence in two to three steps.
TORQUE: 12 N.m (1.2 kgf.m, 9 lbf.ft)
19) Install the engine on the outboard motor (P. 7-6).
20) Install the following parts.
– Crankshaft pulley (P. 9-17)
– Electric parts/main wire harness (P. 18-14, 17, 19 and 27)
– Silencer duct (P. 6-4)
– Throttle body/intake manifold (P. 5-132)
– Silencer case (P. 5-135)
– L./R. engine under covers (P. 4-14)
– Engine cover (P. 4-2)
[1]
CRANKCASE
[2] 13 x 20 mm
DOWEL PIN (2)
6 x 25 (18)
⑫
⑬
⑭
⑧
⑨
⑤
④
①
②
⑥
③
⑦
⑪
⑱
⑩
⑰
⑮
⑯
