![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757487.webp)
14-20
7) Before removing the bearing, check the bearing for
abnormal sound and play. Replace if necessary.
8) Install a commercially available universal bearing puller
between the reverse bevel gear and the bearing.
9) Remove the bearing from the reverse bevel gear using the
special tools as shown.
Replace the bearing with a new one on assembly.
TOOLS:
Driver
07749-0010000
Attachment, 27.2
07747-0010300
Pilot, 35 mm
07746-0040800
10) Check the thrust bearing for abnormal sound and play.
Replace if necessary.
11) Remove the thrust bearing, thrust bearing washer and the
105 x 3.1 mm O-ring from the propeller shaft holder.
Replace the O-ring with a new one on assembly.
12) Before removing the 30 x 45 x 7 mm water seals, check the
water seal lips for cut and other damage. Replace the water
seals if necessary.
13) Remove the two 30 x 45 x 7 mm water seals from the
propeller shaft holder using a commercially available oil
seal remover.
Replace the water seals with the new ones on assembly.
[1]
DRIVER
07749-0010000
[4]
PILOT, 35 mm
07746-0040800
[2]
ATTACHMENT, 27.2
07747-0010300
[5]
UNIVERSAL
BEARING PULLER
(Commercially
available)
[3]
50 x 90 x 20 mm
RADIAL BALL
BEARING
[3]
THRUST
BEARING
[4]
THRUST BEARING
WASHER
[1]
30 x 45 x 7 mm
WATER SEALS
[2] 105 x 3.1 mm
O-RING
[1]
PROPELLER
SHAFT HOLDER
[2]
PROPELLER
SHAFT HOLDER