14-60
14) Before removing the taper bearing (outer race), check the
outer race for damage. Replace the inner race and the outer
race as a set if necessary.
15) Remove the taper bearing (outer race) from the bearing
holder using the special tools and the hydraulic press.
TOOLS:
Driver
07749-0010000
Taper vearing driver attachment
070PD-ZY60100
16) Remove the shim from the bearing holder.
Replace the shim with a new one on assembly.
18) Check the thrust bearing for abnormal sound and play.
Replace if necessary.
19) Remove the thrust bearing, thrust bearing washer, shim
and the 105 x 3.1 mm O-ring from the propeller shaft
holder.
• Replace the shim with a new one on assembly.
• Replace the 105 x 3.1 mm O-ring with a new one on
assembly.
NOTICE
20) Before removing the 30 x 45 x 7 mm water seals, check the
water seal lips for cut and replace if necessary.
21) Remove the two 30 x 45 x 7 mm water seals from the
propeller shaft holder using a commercially available oil
seal remover.
Replace the water seals with the new ones on assembly.
[1]
TAPER BEARING
DRIVER
ATTACHMENT
070PD-ZY60100
[2]
THRUST BEARING
WASHER
[3]
PROPELLER SHAFT
[1]
PROPELLER
SHAFT HOLDER
[3]
BEARING
HOLDER
[2]
DRIVER
07749-0010000
[3] THRUST
BEARING
[4]
THRUST SHIM
[2]
THRUST BEARING
WASHER
[5]
105 x 3.1 mm O-RING
[1]
PROPELLER
SHAFT HOLDER
[1]
30 x 45 x 7 mm
WATER SEALS
[2]
PROPELLER
SHAFT HOLDER
17) Remove the thrust bearing washer and the propeller shaft
from the propeller shaft holder.