![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757649.webp)
17-18
6) Clamp the neutral switch wire with the clip A and set the
clip A on the neutral switch bracket.
7) Connect the neutral switch 2P connector and set the neutral
switch 2P connector on the connector bracket A.
8) Set the fuel tube holder on the connector bracket A.
9) Clamp the fuel tube A on the connector bracket A.
10) Set the harness band clip that clamps the alternator fuse
cable on the neutral switch bracket.
11) Install the neutral switch bracket by aligning a small hole in
the neutral switch bracket with the boss on the seal holder
while pulling the detent arm to your side. Tighten the 6 x 14
mm flange bolt securely.
12) Apply marine grease to the concave in the shift arm and to
the shift shaft B.
Pulling the detent arm to your side, install the shift arm on
the shift shaft B.
[1]
FUEL TUBE HOLDER
[4]
CLIP A
[7]
NEUTRAL
SWITCH
BRACKET
[5]
HARNESS
BAND CLIP
[6]
ALTERNATOR
FUSE CABLE
[2]
NEUTRAL SWITCH
2P CONNECTOR
[3]
CONNECTOR
BRACKET A
[5]
DETENT
ARM
[1] (Pull in the direction
of the arrow.)
6 x 14
[3]
NEUTRAL SWITCH
BRACKET
[4]
BOSS
[2]
HOLE
[3]
SHIFT
SHAFT B
[2]
SHIFT ARM
[1]
DETENT
ARM
[4] (MARINE
GREASE)
[5]
Pull to your side.