BF135A•BF150A
5-120
8) Apply a thin coat of the engine oil to a new cover gasket and
install it on the water jacket cover.
9) Set the eight collars on the water jacket cover and install the
water jacket cover on the vapor separator chamber.
10) Set the eight 5 mm washers and the eight 5 mm screw-
washers, then tighten the screws to the specified torque.
TORQUE: 3.4 N
•
m (0.35 kgf
•
m, 2.5 lbf
•
ft)
11) Connect the 7 x 400 mm water tube to the upper tube joint
of the water jacket cover, and secure the connection of the
tube with the tube clip.
12) Connect the 7.3 x 350 mm water tube to the lower tube joint
of the water jacket cover, and secure the connection of the
tube with the tube clip B12.
[6]
TUBE CLIP
[7]
TUBE CLIP
B12
[8]
7 x 400 mm
WATER TUBE
[9]
7.3 x 350 mm
WATER TUBE
[2]
WATER JACKET
COVER
[3]
5 mm
COLLAR (8)
[4]
5 mm SCREW-
WASHER (8)
[5]
5 mm
WASHER (8)
[1]
COVER GASKET
Do not reuse.
