2-57
[5]
POWER TILT
MOTOR
2P CONNECTOR
[10] MAIN WIRE
HARNESS
[2]
HARNESS BAND
CLIP
[9] NEUTRAL
SWITCH
2P CONNECTOR
[8] CLIP A
[7]
ALTERNATOR FUSE
CABLE
[2]
HARNESS BAND
CLIP
[2]
HARNESS BAND
CLIP
[2] HARNESS
BAND CLIP
[6] POWER TILT RELAY
1P CONNECTOR
[3]
POWER TILT
RELAY
[4] WIRE HARNESS CLIP
Clamp the power tilt relay 3P
connector, 2P connector and
the 1P connector wires as
shown.
[1] POWER TILT RELAY GROUND TERMINAL
Install pushing the ground
terminal against the projection
on the crankcase.
[1]-2 PROJECTION
[1]-1
GROUND
TERMINAL
[16] IAT (INTAKE AIR
TEMPERATURE)
SENSOR
2P CONNECTOR
[17]
IAT (INTAKE AIR
TEMPERATURE)
SENSOR
[15]
MAP (MANIFOLD
ABSOLUTE
PRESSURE)
SENSOR
3P CONNECTOR
[14] MAP (MANIFOLD
ABSOLUTE PRESSURE)
SENSOR
[12]
IAC (IDLE AIR
CONTROL)
VALVE
[11]
IAC (IDLE AIR
CONTROL) VALVE
2P CONNECTOR
[2]
HARNESS BAND
CLIP
[2]
HARNESS BAND
CLIP
[10] MAIN WIRE
HARNESS
[13] HARNESS CLIP
Clamp the MAP sensor
wire in the recess of the
intake manifold.