11-3
b. INSPECTION
Check for continuity between the terminal and body.
If there is no continuity, replace the EOP switch
c. ASSEMBLY
1) Apply engine oil to a new 13 x 1.5 mm O-ring and install it
on the ECT sensor.
2) Tighten the ECT sensor to the specified torque and connect
the ECT sensor 2P connector.
TORQUE: 12 N.m (1.2 kgf.m, 9 lbf.ft)
3) Apply engine oil to the 9.5 x 1.9 mm O-ring and install it on
the EOP switch (high pressure side).
4) Tighten the EOP switch (high pressure side) to the specified
torque and connect the EOP switch (high pressure side) 2P
connector.
TORQUE: 22 N.m (2.2 kgf.m, 16 lbf.ft)
[3]
EOP SWITCH
(High pressure side)
[2]
ECT SENSOR
[1]
9.5 x 1.9 mm O-RING
[4]
13 x 1.5 mm O-RING
