6-17
h. ALTERNATOR ASSEMBLY ASSEMBLY
1) Tighten the two stud bolts on the stator.
2) Apply grease to the outer surface of a new front bearing.
Drive the front bearing into the stator using the special
tools as shown.
TOOLS:
Driver
07749-0010000
Attachment, 37 x 40 mm
07746-0010200
Pilot, 15 mm
07746-0040300
[1]
DRIVER
07749-0010000
[3] ATTACHMENT,
37 x 40 mm
07746-0010200
[2]
PILOT, 15 mm
07746-0040300
3) Install the retainer plate with the projections toward the
front bearing and tighten it with the four screws.
[1]
RETAINER
PLATE
[2] SCREW (4)
[4] STUD
BOLTS (2)
[3]
STATOR
[DRIVE END
HOUSING]
[5]
PROJECTIONS