14-64
6) Apply gear oil to the circumference of the new 105 x 3.1
mm O-ring and install it on the propeller shaft holder.
7) Install the new thrust shim on the propeller shaft holder.
8) Install the thrust bearing washer with the chamfered side
toward the thrust shim.
9) Apply gear oil to the circumference of the thrust bearing
and install it on the thrust bearing washer.
11) Install the propeller shaft and the thrust bearing washer on
the propeller shaft holder.
Install the thrust bearing washer with the chamfered side
toward the flange of the propeller shaft.
12) Install the new shim on the bearing holder.
13) Apply gear oil to the circumference of the taper bearing
(outer race) and install it on the bearing holder.
Install the taper bearing (outer race) with the smaller
diameter side toward the shim.
NOTICE
14) Install the taper bearing (outer race) on the bearing holder
using the special tools and the hydraulic press as shown.
TOOLS:
Driver
07749-0010000
Taper bearing inataller attachment
070PF-ZY60100
[3]
THRUST BEARING
WASHER
[5]
105 x 3.1 mm
O-RING
[2] THRUST BEARING
WASHER
[4] PROPELLER
SHAFT HOLDER
[1]
PROPELLER
SHAFT HOLDER
[4]
PROPELLER SHAFT
[1]
CHAMFER
[3]
CHAMFER
[6]
THRUST SHIM
[4]
50 x 90 x 28 mm
TAPER BEARING
(OUTER RACE)
[1]
FORWARD BEVEL
GEAR SHIM
[3]
BEARING
HOLDER
[3]
BEARING
HOLDER
[1]
DRIVER
07749-0010000
[2]
TAPER BEARING
INSTALLER
ATTACHMENT
070PF-ZY60100
[2]
THRUST
BEARING
[2]
50 x 90 x 28 mm
TAPER BEARING
(OUTER RACE)
[1]
<LC, XC, LD and XD types>
[4]
<XCC, LCD and XCD types>
[5] Groove
[2] No groove
[3]
PROPELLER SHAFT
[3]
PROPELLER SHAFT
10) Check that there is the groove at the spline of the propeller
installation side of the propeller shaft.
