![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757640.webp)
17-9
9) With the remote control cable (shift side) in the position
described in step 7 (i.e. the mark (C) aligns with the cable
outer seal end), adjust the shift side remote control cable
length by turning the shift pivot so that the shift pivot sets
on the shift link pin smoothly.
Take care not to move the mark (C) out of alignment. Set
the shift pivot on the shift link pin with care not to move the
shift link pin from the center of the free play.
NOTICE
10) After connecting the cable, move the remote control lever
back and forth and check for shift.
When it is hard to put the remote control lever in the “F”
(Forward) or “R” (Reverse) position with the engine
stopped, shift the gear while turning the propeller or
propeller shaft. Do not shift the gear with force, or damage
to the shift system can result.
11) If the gear is not in neutral by moving the remote control
lever from the “F” (Forward) to the “N” (Neutral) position,
remove the shift side remote control cable from the shift
link pin and move the inner cable toward the mark (A).
Repeat the procedure from the step 8 (P. 17-8).
12) If the gear is not in neutral by moving the remote control
lever from the “R” (Reverse) to the “N” (Neutral) position,
remove the shift side remote control cable from the shift
link pin and move the inner cable toward the mark (B).
Repeat the procedure from the step 8 (P. 17-8).
13) After adjustment, set the remote control lever in each
position and check for operation. If the gear is not in neutral
securely, perform the step 11 or 12 again.
14) Adjust the shift side remote control cable after connection
(P. 3-24).
Tighten the shift pivot lock nut securely.
NOTICE
[2]
SHIFT PIVOT
[2]
SHIFT PIVOT
[1]
REMOTE CONTROL CABLE
(Shift side)
[1]
REMOTE CONTROL CABLE
(Shift side)
[3]
SHIFT LINK PIN
[2]
MARK (A)
[2]
MARK (C)
[3]
MARK (C)
[1]
ADJUSTMENT RANGE
[1]
ADJUSTMENT RANGE
[3]
MARK (B)