14-59
7) Position the propeller shaft holder assembly on the fixing
tool and secure the holder assembly with the bolt.
8) Hold the fixing tool with a vise.
9) Loosen the bearing holder using the special tool as shown.
TOOL:
Pin spanner wrench, 110 mm
07WAA-S1G0100
10) Remove the bearing holder assembly from the propeller
shaft holder.
Avoid holding the propeller shaft holder directly in a vise.
Use the fixing tool to hold it in a vise.
NOTICE
11) Before removing the taper bearing (inner race), check the
inner race for abnormal sound and play. If there is any
abnormal sound or play in the inner race, replace the inner
race and the outer race as a set.
12) Attach a commercially available universal bearing puller
between the bearing holder and the forward bevel gear.
13) Remove the forward bevel gear from the taper bearing
(inner race) using the special tools and the hydraulic press.
TOOLS:
Driver
07749-0010000
Attachment, 27.2
07747-0010300
Pilot, 35 mm
07746-0040800
[3]
UNIVERSAL
BEARING PULLER
(Commercially
available)
[6]
BEARING
HOLDER
[5]
FORWARD BEVEL
GEAR
[7]
50 x 90 x 28 mm
TAPER BEARING
(INNER RACE)
[1]
PIN SPANNER
WRENCH, 110 mm
07WAA-S1G0100
[1]
DRIVER
07749-0010000
[2]
ATTACHMENT,
27.2
07747-0010300
[4]
PILOT, 35 mm
07746-0040800
[3]
FIXING TOOL
[2]
PROPELLER
SHAFT HOLDER
ASSEMBLY
