![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757500.webp)
14-33
16) Install the needle bearing in the gear case using the special
tools.
TOOLS:
Shaft installer, 15 x 370 mm
07VMF-KZ30200
Attachment, 78 x 90 mm
07GAD-SD40101
Oil seal driver attachment, 27.5 x 44 mm
07948-9540000
17) After installation, check that the bottom surface of the
needle bearing is flush with the bottom of the gear case.
Apply grease to the needle bearing roller.
18) Install the vertical shaft assembly taking care not to bring
the needle bearing roller out of position.
19) Apply the thread locking agent to the threads and seat of
the 64 mm lock nut, and tighten the lock nut using the
special tool.
TOOL:
Lock nut wrench, 30/64 mm
07916-MB00002
TORQUE: 123 N.m (12.5 kgf.m, 90 lbf.ft)
[4]
OIL SEAL DRIVER
ATTACHMENT,
27.5 x 44 mm
07948-9540000
[1]
SHAFT INSTALLER,
15 x 370 mm
07VMF-KZ30200
[2]
ATTACHMENT,
78 x 90 mm
07GAD-SD40101
[6]
NEEDLE
BEARING
[3]
GEAR CASE
[1]
LOCK NUT WRENCH,
30/64 mm
07916-MB00002
[5]
(Apply grease
to the roller.)