![background image](http://html1.mh-extra.com/html/honda/marine-bf135a/marine-bf135a_manual_2157757342.webp)
7-7
[1]
EXHAUST
MANIFOLD
[2]
EXAUST GUIDE
①
②
③
④
①
②
③
④
⑤
⑦
⑥
8) Lower the engine assembly slowly onto the mounting case
while aliging the exhaust manifold of the engine assembly
with the exhaust guide.
9) Connect the water relief tube B and the 7 x 40 mm tube,
disconnected in step 2, to the exhaut guide (P. 8-7, 9).
Lower the engine assembly onto the mounting case slowly
while holding the engine vertically.
NOTICE
10) Tighten the four 8 x 30 mm flange bolts in the numbered
sequence in two or three steps from the underside of the
mounting case. Tighten to the specified torque.
TORQUE: 26 N.m (2.7 kgf.m, 20 lbf.ft)
11) Loosely tighten each bolt and washer at the designated
places from the underside of the mounting case. Then,
tighten them to the specified torque in the numbered
sequence in two or three steps.
TORQUE:
12 x 70 mm hex. bolt,
12 x 130 mm hex. bolt: 64 N.m (6.5 kgf.m, 47 lbf.ft)
10 x 80 mm flange bolt,
10 x 110 mm flange bolt: 44 N.m (4.5 kgf.m, 33 lbf.ft)
8 x 100 mm flange bolt: 26 N.m (2.7 kgf.m, 20 lbf.ft)
Tightening
Part name
Q' ty
point
①
,
②
12 x 130 mm hex. bolt, 12 mm washer
2
③
12 x 70 mm hex. bolt, 12 mm washer
1
④
,
⑤
10 x 110 mm flange bolt
2
⑥
10 x 80 mm flange bolt
1
⑦
8 x 100 mm flange bolt
1