8-7
e. WATER RELIEF TUBE C/RELIEF VALVE
ASSEMBLY
Check the tubes for deterioration and cracks before assembly.
Replace if necessary.
1) Install the relief valve on the mount case noting the
installation direction as shown.
2) Set a new relief valve cover O-ring on the relief valve cover,
and install the relief valve cover with the two 6 x 22 mm
flange bolts.
3) Connect the 7 x 160 mm tube, 7 x 40 mm tube and the
water relief tube C to the T-joint, and clamp each tube with
the tube clamp D10.5.
4) Set the tube clamp D10.5 on the side of each tube where is
opposite to the other end connected to the T-joint, and
connect each tube to the engine side.
Clamp each tube with the tube clamp D10.5.
NOTICE
[3]
RELIEF VALVE
[4]
RELIEF VALVE
COVER O-RING
[8]
7 x 160 mm TUBE
[2]
WATER RELIEF
TUBE C
[5]
7 x 40 mm TUBE
[7]
RELIEF VALVE COVER
6 x 22 (2)
[6]
T-JOINT
[1]
TUBE CLAMP D10.5 (6)
[2]
RELIEF VALVE
[1] RELIEF VALVE COVER SIDE
[3]
MOUNTING CASE SIDE
