Honda 2010 CBF 250, Workshop Manual

Page: 234 / 291

HYDRAULIC BRAKE
CBX250
DISMANTLING
Remove the spring of pads.
Place a cloth on the pistons.
Position the body of the clamp to the pistons oriented
downwards and apply jets short of compressed air at the
entrance of fluid, in order to make the pistons.
d
Do not use compressed air at high pressure and does not
place the mouthpiece of air very near the entrance to the fluid.
To remove the coveralls and stamps of the pistons
press and levántelos.
i
Clean the slots in the stamps of piston with fluid of brake
again.
Be careful not to damage the surface of slip-
ping from the piston.
Remove the support of the clip of the brake.
Remove, the support of the clamp, the protective rubber
of bolt clamp.
Remove from the body of the clamp, the protective
rubber of bolt of support.
SPRING OF PADS
DUST COVERS
STAMPS OF THE PISTONS
PROTECTIVE RUBBER
OF BOLT
OF Support
SUPPORT FOR THE CLAMP
BODY OF PROTECTIVE RUBBER
CLAMP
THE BOLT CLAMP