Honda 2010 CBF 250, Workshop Manual

Page: 275 / 291

LIGHTS/INDICATORS/SWITCHES
19-4
HEADLIGHT
LAMP REPLACEMENT
d
Remove the two screws, the collars and the connector of the
headlight.
Release the connector 3P of socket headlamp. Remove the
layer of rubber.
Release retainer and remove the whole socket / lamp in
the headlight.
i
In the event that touch the lamp with his hands without
protection, wipe with a cloth dampened with alcohol, to
avoid fails premature.
Remove the lamp in the socket.
Install the new lamp in the socket.
Install the whole socket / lamp, aligning their tabs with
the slots in the connector of the headlight.
Lock the retainer the lamp. Install the layer of rubber
firmly in the headlight.
Avoid touching the halogen lamp. The finger prints that
remain in the lamp may form hot spots and cause their
burning.
•Halogen lamp of the light is heated too while the
headlight is switched on and stays hot for some
time, after which turns the headlight.
•Make sure that the lamp has cooled, before making
services.
CBX250
Install the connector 3P in the socket of the light.
Install the connector of the light in their casing.
Install the two screws and the collars.
Adjust the focus of the light (page 3- 20).
Then, tighten the screws.
COLLARS
CONNECTOR 3P
SCREWS UNIT OF THE HEADLIGHT
LAYER OF RUBBER
WHOLE SOCKET/
LAMP
RETAINER
LAMP
COLLARS
CONNECTOR 3P
SCREWS
UNIT OF THE HEADLIGHT