Honda 2010 CBF 250, Workshop Manual

Page: 134 / 291

CLUTCH/GEAR SELECTOR
CBX250
Clutch plates
Check the plates of clutch with regard to
discolourment.
Check the twist the plates of the clutch in a flat surface,
using a gauge of thicknesses.
NOTE
Replace the disks bearings and license plates as a whole.
Service Limit 0,30 mm
Bell clutch
Check the rebated de la campana of clutch with regard to
furrows, carvings or abnormal wear, caused by the disks of
friction. Check the teeth serrillados gear commanded
primary with regard to wear or damage. Guide of the bell of
the clutch Measure the D. E. and D. I. the guide to the bell of
the clutch.
Main Axle
Measure the D. E. of the main axle in the area of the
surface of slip of the guide to the bell of the clutch.
Service Limit 21,91 mm
Límite de
D.I. 22,05 mm
Servicio
D.E. 22,90 mm
Body of clutch
Check the body of clutch with regard to furrows, carvings
or abnormal wear caused by the plates of the clutch.
Replace, if necessary.
Clutch plate
GUIDE TO THE BELL OF THE CLUTCH
Bell clutch
Body of clutch