Honda 2010 CBF 250, Workshop Manual

Page: 141 / 291

ALTERNATOR /CLUTCH 10.
SERVICE INFORMATION 10-1
INVESTIGATION OF FAULTS 10-1
ALTERNATOR STATOR 10-2
DISMANTLING OF THE FLY WHEEL 10-3
CLUTCH START 10-4
INSTALLING THE FLY WHEEL 10-6
CBX250
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•Services submitted in this section can be made with the engine installed in the chassis. •In this section describes pro-
cedures of service of stator alternator, driving the engine and clutch start. These components can be removed with the
engine installed in the chassis. •Refer to Section 18 to obtain information in respect of services in the starter motor.
SPECIFICATIONS
Unit: mm
Item Value Limit de Servicio
D. E. of highlight the spiral commanded the start 45,660 – 45,673 45,63
TORQUE VALUES
Bolt of engine flywheel 103 N.m (10,3 kg.m) Apply oil to the thread and
to the surface of settlement
Bolt Torx clutch start 16 N.m (1,6 kg.m) Apply locks chemistry to the
thread Bolt for fixing the pulse generator power 5 N.m (0,5 kg.m)
Bolt of fixing the stator
10 N.m (1,0 kg.m)
Bolt of pin wiring stator 10 N.m (1,0 kg.m)
SPECIAL TOOLS
Support of the fly wheel of the engine 07725-0040000
Extractor of the rotor 07733-0020001
Extension bar 07716-0020500
INVESTIGATION OF FAULTS
The starter motor turns, but the motorcycle engine does not start. • Clutch defective
start • damage in the machinery intermediate and spiral of reduction in the starter
motor