Honda 2010 CBF 250, Workshop Manual

Page: 114 / 291

CYLINDER HEAD/VALVES
CBX250
Installing the TRIGGER FOR THE TENSILE DISTRIBU-
TION CHAIN
Remove the cap the trigger for the tensile.
Check the functioning of trigger for the tensile: The axle of
tensor should not enter the body, when pressed. When
revolved clockwise, with a screwdriver, the axle of tensor
should retract into the body. The axle skipped toward
outside the body, driven by the spring, just remove the
screwdriver.
Using the limiting tool rotate the axle of actuator clockwise, to
make retract the tensile and prevent damage to the distri-
bution chain. Then insert totally the limiting tool to hold the
tensile in that position.
Install a new gasket in the trigger for the tensile
distribution chain. Install the trigger for the tensile in the
cylinder and tighten the fixing bolts.
Make a limiting tool of the axle of tensor with a fine piece of
steel (0.8 mm thickness), as a sign the diagram.
TRIGGER FOR THE TENSILE
JUNTA
Limiting Tool
NUEVA