Honda 2010 CBF 250, Workshop Manual

Page: 99 / 291

CYLINDER HEAD / VALVES
7-6
Loosen the screw cap on the trigger for the tensile, but not
yet remove it.
Remove the trigger for the tensile distribution chain and the
gasket, loosening alternately two bolts.
TRIGGER FOR THE TENSILE/GASKET
ACUTATOR PLUG BOLTS
Remove the six pins and the supports of the camshafts.
Using a wire raise of the distribution chain, to
prevent a fall in the casing of the engine.
Remove the camshafts.
CAMSHAFTS BOLT
BOLT CAMSHAFT SUPPORTS
Remove the actuators valves and the shims.
NOTE
•Be careful not to damage the accommodations to the
actuators valves. The •shims can be caught inside the
actuators valves. Do not let it fall into the casing of
the engine. •Write down the location of each fit and
actuating valve to ensure that will be reinstated in its
original position. •The actuators valves can be re-
moved easily with a place of windy or a magnet. The
•shims can be removed easily with a clip or a magnet.
SHIM
ACTUATING THE valve
Remove the three bolts and the guide to the distribution chain.
CHAIN
GUIDE TO THE DISTRIBUTION CHAIN
CBX250