Honda 2010 CBF 250, Workshop Manual

Page: 217 / 291

REAR WHEEL/BRAKE/SUSPENSION
14-16
REPLACEMENT OF THE BEARINGS OF THE
JOINT
Turn the track of each ball fields of pivot swing arm with his
finger.
The bearing must turn gently, without noises or excessive
play.
Make sure that the external track bearing is not with ex-
cessive play in the pivot swing arm.
Replace the bearing, in case of the track not internal gently
turn and without noise, or the track outside this play
excessive in the pivot swing arm.
Apply grease to new ball needles.
Using the special tools and a press, install the bearing of
needles in the left side of pivot swing arm.
Tools:
Driver
07749-0010000
Accessory, 28 x 30 mm 07946-187100
Pilot 22 m 07746-0041000
Apply grease to new ball needles.
Using the special tools and the press, install carefully the
new ball needles in the articulation of the damper.
Tools:
Driver
07749-0010000
Accessory, 24 x 26 mm 07946-0010700
Pilot, 17 mm 07746-0040400
NOTE
Install the bearing the marks oriented toward the outside.
CBX250
BEARING
ACCESSORY
DRIVER
BALL NEEDLES
PILOT
ACCESSORY
DRIVER
BALL NEEDLES
PILOT
6,0 – 7,0 mm
5,0 – 6,0 mm
BALL
NEEDLES
GRASA
GRASA
NUEVO
NUEVO