Honda 2010 CBF 250, Workshop Manual

Page: 273 / 291

LIGHTS/INDICATORS/SWITCHES
19-2
SPECIFICATIONS
T
ORQUE VALUES
Bolt pivot of side stand 10 N.m (1,0 kg.m)
Against the pivot bracket 39 N.m (3,9 kg.m)
Bolt breaker of bracket 10 N.m (1,0 kg.m)
Nut terminal breaker of deadlock 2 N.m (0,2 kg.m)
Body breaker deadlock 12 N.m (1,2 kg.m)
INVESTIGATION OF FAULTS
Table of instruments
•Prior to inspect the picture of instruments, make sure that the battery, the fuse main (20), the auxillary fuse (15),
the fuse in the clock / kilometer (10) and the connector 16 of the speedometer are in good condition and firmly
connected.
•Turn the power switch toward the position ON and inspect the following: Verify if indicators of the speedometer
and tachometer returning to the point of origin. Check to see if the desk digital lights.
CBX250
Item Specifications
Light bulbs Headlight High 12 V – 35 W
Low 12 V – 35 W
Rear/light of brake 12 V – 5/21 W
Indicator front direction 12 V – 15 W x 2
Indicators rear 12 V – 15 W x 2
Light of the instruments LED
Indicator of indicator LED
Indicator of the headlight high LED
Neutral Indicator LED
Sidestand indicator LED
Fuses Main fuse 20 A
Auxillary fuse 10 A x 3, 15 A x 1
Abnormal
Abnormal
Turn the power switch for the position on.
The indicator of speed or tachometer
should go back and align with the 0 of the
bar indicator.
• Table of instruments defective.
Disconnect the cable positive (+) battery.
Wait a few seconds plug back and check the
functioning of the table of instruments.
When the power switch is turned OFF position), the indicator of speed or tachometer not aligns with the 0 of the bar
indicator.