Honda 2010 CBF 250, Workshop Manual

Page: 198 / 291

FRONT WHEEL/SUSPENSION/STEERING
CBX250
Install the adjustment nut of the steering column and
tighten manually. Then, tighten the pair of initial pinch.
Tool:
Key to nuts 07HMA-MR70100
TORQUE: 25 N.m (2,5 kg.m)
Install and tighten the with your fingers. Hold the adjust-
ment nut of the steering column and tighten the 1/4 lap
(90°), to align their slots with the tabs of the washer locks.
Double the tabs of the washer locks, directing them
toward the slots in the against.
Turn the steering column to the right and left, from one ex-
treme to another, at least five times, for which the bearings
are settled. Make sure that the steering column will move
gently, without play nor gridlock. Then, loosen the
adjustment nut. Tighten again the adjustment nut of the
steering column, the pair specified.
TORQUE: 22 N.m (2,2 kg.m)
Check once more the smooth movement of the steering column,
without play my gridlock. Install a new washer locks in the
steering column. Align the tabs of the washer locks with the slots
in the adjustment nut. Double the two tabs opposite (minors),
directing them toward the slots in the adjustment nut.
LOCKNUT
TAB OF THE WASHER Locks
ADJUSTMENT
NUT
KEY TO NUTS
LOCKNUT
WASHER
Locks
ADJUSTMENT NUT
NUEVA