Honda 2010 CBF 250, Workshop Manual

Page: 139 / 291

CLUTCH/GEAR SELECTOR
9-12
Lift the arm limiter using a screwdriver. Install the ear of
guide and the plate of leva of changing gears.
NOTE
Align the hole in the bolt on the plate leva, with the ear
of guide of the drum of gears.
GUIDE SPIKE PLATE OF CAM gears
ARM LIMITER OF
CHANGING gears
Align
INSTALLATION OF THE LID RIGHT SIDE
OF THE CASING OF THE ENGINE
Apply grease to lip of the new dust and install in the lid
right side of the casing of the engine.
DUST COVER
Install the spring of return in the spindle of the arm of actuat-
ing the clutch. Then, install the spindle in the lid right side of
the casing of the engine.
NOTE
Set the spring of return in the lid right side of the
casing of the engine.
SPINDLE ARM OF ACTUATING
THE CLUTCH
RETURN SPRING
Apply locks chemistry to the thread of bolt to the plate of
leva of changing gears.
Install and tighten the bolt to the plate of leva of changing
gears.
TORQUE: 12 N.m (1,2 kg.m)
Install the lid right side of the casing of the engine (page
9-3).
PLATE OF CAM gears
BOLT
CBX250
TRABA
GRASA
NUEVO
`ˆÌi`ÊÜˆÌ Ê
˜vˆÝÊ*Ê`ˆÌœÀ
Ê