Honda 2010 CBF 250, Workshop Manual

Page: 131 / 291

CLUTCH/GEAR SELECTOR
9-4
ARM OF ACTUATING THE CLUTCH
Inspection
Remove the arm of actuating the clutch and spring for the
return of the lid right side of the casing of the engine.
Check the spindle arm of actuating the clutch with regard to
wear or damage.
Check the spring of return with regard to fatigue or damage.
TOP RIGHT SIDE OF THE CASING OF THE ENGINE
RETURN ACTUATING ARM OF THE
SPRING CLUTCH
CLUTCH
DISMANTLING
Remove the cover right side of the casing of the
engine (page 9-3). Remove the bearing of the
clutch. Loosen the bolts springs of the clutch in
sequence, mixed in several steps. Remove the
bolts and springs. Remove the plate operated.
Unlock the nut of locks of the body of clutch.
i
Set the body of clutch using the special tool. Then, Loosen
the nut of locks.
Special tool:
Support of the body of clutch
07JMB-MN50301
Remove and discard the nut of locks.
Be careful not to damage the thread of the main axle.
OPERATING PLATE
BOLT/SPRING CLUTCH BEARING
SUPPORT OF THE
BODY OF CLUTCH
LOCK OF NUTS
Check the dust and the hub with regard to wear or
damage. Check if they are fixed in the right way.
Replace the defective parts.
INSERT
DUST COVER
CBX250