Honda 2010 CBF 250, Workshop Manual

Page: 187 / 291

FRONT WHEEL/SUSPENSION/STEERING
13-16
NOTE
Through from movements fast and successive, bid the tube
of the fork out of the slide.
Make sure that the tube of the fork to move gently in the
slide. Otherwise, inspect the tube with regard to twist or
damage. Also check the hubs with regard to wear or
damage.
Remove the piston of the fork and the spring of rejection of
the tube of the fork.
NOTE
Do not remove the ring at the piston of the fork, unless
it is necessary replaced.
TUBE OF THE FORK TUBE OF THE FORK
SPRING OF REJECTION
Remove the checkpoint of oil, the ring of support and the hub
slider tube of the fork.
NOTE
In the event that is necessary, remove the hub of tube
guide of the fork forcing the slot with a screwdriver, until
the hub it can draw with the hand.
Do not remove the hub of tube guide of the fork, unless it
is necessary replaced with a new one.
RING OF Support
OIL RING SLIDER SHIM
Remove the vedador of oil of the slide of the fork.
SLIDE OF THE FORK
TUBE OF THE FORK VEDADOR OIL
CBX250
HUB OF
TUBE
GUIDE OF
THE FORK